Verifying the Configuration

After configuring an EVC to transmit multicast services, you can check the status of multicast services.

An EVC has been configured to transmit multicast services.

Run the display igmp-snooping bridge-domain [ bd-id ] [ configuration ] command to check whether IGMP snooping is enabled.
Run the display igmp-snooping router-port bridge-domain bd-id command to check information about router interfaces.
Run the display pim interface [ interface-type interface-number ] [ verbose ] command to check whether PIM-SM is enabled.
Run the display pim routing table command to check IPv4 routing entries.