Checking the Configurations

After configuring EVPN, verify the operating status and information about EVPN functions.

Prerequisites

EVPN has been configured.

Procedure

Run the display default-parameter evpn command to check default EVPN configurations during EVPN initialization.
Run the display evpn vpn-instance [ name vpn-instance-name ] command to check EVPN instance information.
Run the display evpn vpn-instance name vpn-instance-name df result [ esi esi ] command to check the DF election result of an EVPN instance.
Run the display evpn vpn-instance name vpn-instance-name df-timer state command to check the DF timer status of an EVPN instance.
Run the display bgp evpn { all | vpn-instance vpn-instance-name } esi [ esi ] command to check information about the ESIs of a specified or all EVPN instances.
Run the display bgp evpn { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table [ { ad-route | es-route | inclusive-route | mac-route | prefix-route } prefix ] command to check information about BGP EVPN routes.
Run the display bgp evpn all routing-table statistics command to check statistics about BGP EVPN routes.
Run the display evpn mac routing-table command to check MAC route information about EVPN instances.
Run the display evpn mac routing-table limit command to check MAC address limits of EVPN instances.
Run the display evpn mac routing-table statistics command displays MAC route statistics of EVPN instances.
Run the display arp broadcast-suppress user bridge-domain bd-id command to check the ARP broadcast suppression table of a specified BD.
Run the display arp packet statistics bridge-domain bd-id command to check statistics about the ARP packets in a specified BD.