Configuring a VXLAN EVPN

Before enabling interconnection between PE1, PE2, and the EOR, configure basic EVPN and VXLAN functions on PE1 and PE2, and create EVPN instances and NVE interfaces.

Procedure

Run system-view
The system view is displayed.
Run evpn vpn-instance vpn-instance-name bd-mode
An EVPN instance in BD mode is created, and the EVPN instance view is displayed.
Run route-distinguisher route-distinguisher
An RD is configured for the EVPN instance.
Run vpn-target vpn-target &<1-8> [ both | export-extcommunity | import-extcommunity ]
VPN targets (RTs) are configured for the EVPN instance.
Run quit
Exit from the EVPN instance view.
Run interface nve nve-number
The view of a Network Virtualization Edge (NVE) interface is displayed.
Run source ip-address
An IP address is configured for the source virtual tunnel end point (VTEP).
Run vni vni-id head-end peer-list protocol bgp
An ingress replication list is configured.
Run quit
Exit from the NVE interface view.
Run commit
The configuration is committed.