After configuring an EVPN to carry Layer 3 services, check
the configurations.
Prerequisites
EVPN functions have been configured.
Procedure
- Run the display bgp evpn { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table [ { ad-route | es-route | inclusive-route | mac-route | prefix-route } prefix ] command to check information about
BGP EVPN routes.
- Run the display ip routing-table vpn-instance vpn-instance-name or display
ipv6 routing-table vpn-instance vpn-instance-name command on the local PE to check information about VPN routes
received from the remote PE.