After configuring the NFVI distributed gateway function, verify the configurations. On DC-GWs, you can view the VPN peer relationships between DC-GWs and VNFs and the information about the mobile phone routes received from VNFs.
Prerequisites
The NFVI distributed gateway function has been configured.
Procedure
- Run the display bgp { vpnv4 | vpnv6 } vpn-instance vpn-instance-name peer command on DC-GWs to check whether the VPN peer relationships have been established between DC-GWs and VNFs.
- Run the display bgp vpnv4 vpn-instance vpn-instance-name routing-table or display bgp vpnv6 vpn-instance vpn-instance-name routing-table command on DC-GWs to check whether DC-GWs can receive mobile phone routes from VNFs and whether the next-hop addresses of the mobile phone routes are VNF addresses.
- Run the display ip routing-table vpn-instance vpn-instance-name or display ipv6 routing-table vpn-instance vpn-instance-name command on DC-GWs to check whether the VPN routing tables of DC-GWs include mobile phone routes and whether the outbound interfaces of the mobile phone routes are VBDIF interfaces.