Associating an L2VE Interface with an EVPL Instance

Procedure

1. Run system-view

   The system view is displayed.

2. Run interface virtual-ethernet interface-number.subinterface-number mode l2

   The VE Layer 2 sub-interface view is displayed.

3. Run encapsulation { dot1q [ vid low-pe-vid [ to high-pe-vid ] ] | untag | qinq [ vid pe-vid ce-vid { low-ce-vid [ to high-ce-vid ] | default } ] }

   A packet encapsulation type is configured, so that a specific type of interface can transmit data packets of the specified encapsulation type.

4. Run rewrite pop { single | double }

   The function to remove VLAN tags from received packets is enabled.

   For single-tagged packets received by the Layer 2 sub-interface, specify single to enable the sub-interface to remove the VLAN tag from each packet.

   If the packet encapsulation type is set to QinQ in the previous step, specify double to enable the sub-interface to remove double VLAN tags from each double-tagged packet received.

5. Run evpl instance evpl-id

   The Layer 2 sub-interface is bound to an EVPL instance.

6. (Optional) Run evpn-vpws ignore-ac-state

   The interface is enabled to ignore the AC status.

7. Run commit

   The configuration is committed.