Verifying the Configuration

After configuring NFVI distributed gateways, verify the configuration.

All configurations of NFVI distributed gateways (symmetric mode) are complete.

Run the display bgp { vpnv4 | vpnv6 } vpn-instance vpn-instance-name peer command on each DC gateway to check whether the VPN peer relationships between DC gateways and VNFs are in the Established state.
Run the display bgp vpnv4 vpn-instance vpn-instance-name routing-table or display bgp vpnv6 vpn-instance vpn-instance-name routing-table command on each DC gateway to check whether the DC gateway has received UE routes from VNFs and whether the next hop addresses of these routes are VNF addresses.
Run the display ip routing-table vpn-instance vpn-instance-name or display ipv6 routing-table vpn-instance vpn-instance-name command on each DC gateway to check whether UE routes exist in the VPN routing table and whether the outbound interfaces of these routes are VXLAN or VXLAN6 if such routes exist.