Creating an L3VE Interface

Procedure

1. Run system-view

   The system view is displayed.

2. Run interface virtual-ethernet interface-number

   A VE interface is created, and its view is displayed.

3. Run ve-group ve-group-id l3-access

   The VE interface is configured as an L3VE interface used for BRAS access and bound to a VE group.

   

   A VE group contains only one L2VE interface and one L3VE interface. The two VE interfaces in a VE group must be on the same board.

4. Run commit

   The configuration is committed.