Logging In to a Device

You can use the PC to log in to a device to configure and manage the device.

Context

You must configure login parameters based on the physical attributes of the console port on the device. The physical attributes include the transmission rate, data bits, parity, stop bits, and flow control mode. For the first login, use the default values of parameters.

The PuTTY.exe software must have been installed on the client.

Procedure

Start the PuTTY.exe program. In the PuTTY configuration page (shown in Figure 1), set the connection type to Serial.
Figure 1 PuTTY configuration page
Choose Serial in the Category navigation tree on the left of the PuTTY configuration page. In the port connection configuration page (shown in Figure 2), set the communication parameters of the port to the default values of the device. (The following figure is for reference only. Use the default settings during configuration.)
Figure 2 Port connection configuration page
Click Open. Then the system prompts you to set an authentication password, as shown in Figure 3. After the confirm the password, the system automatically saves it.
Figure 3 Login page

After the password is set, the command prompt (for example, <HUAWEI>) of the user view is displayed, which indicates that you have entered the user view and can perform configurations.

You can enter commands to configure the device or view its running status. Enter a question mark (?) when you need help.
The password must meet the following requirements:
- The password is entered in man-machine interaction mode. The system does not display the entered password.
- A password is a string of 8 to 16 case-sensitive characters and must contain at least two types of the following characters: uppercase letters, lowercase letters, digits, and special characters.
- Special characters exclude question marks (?) and spaces. However, spaces are allowed in the password if the password is enclosed in quotation marks.
  - Double quotation marks cannot contain double quotation marks if spaces are used in a password.
  - Double quotation marks can contain double quotation marks if no space is used in a password.
  For example, the password "Aa123"45"" is valid, but the password "Aa 123"45"" is invalid.
The configured password is displayed in ciphertext in the configuration file.