Configuring Alarm Suppression
The system suppresses repeated alarms, flapping alarms, and intermittent alarms by default. You can disable alarm suppression of alarms that you are concerned about, hardware alarms, and ambient alarms.
Context
Alarm suppression has the following impacts on the system:
- When alarm suppression is enabled, alarm suppression takes effect, and you can configure an alarm suppression period.
- When alarm suppression is disabled, alarm suppression does not take effect in the system.
Procedure
- Run system-view
The system view is displayed.
- Run alarm
The alarm management view is displayed.
- Run delay-suppression enable
Alarm suppression is enabled.
To disable alarm suppression, run the undo delay-suppression enable command.
Do not leave alarm suppression disabled. Otherwise, a large number of redundant alarms will be generated.
- Run commit
The configuration is committed.