Before you release bandwidth resources of an existing GMPLS UNI tunnel or modify tunnel parameters, disable the GMPLS UNI tunnel on the ingress EN.
To shut down an existing GMPLS UNI tunnel, run the shutdown command on the ingress EN to release label and bandwidth resources assigned to the tunnel. GMPLS UNI tunnel configurations, however, are kept.
To start this tunnel again, run the undo shutdown command to re-establish the tunnel based on the original configuration file. The path of the re-established UNI LSP within a transport network may be different from the original one because topology or bandwidth within a transport network may change.
The view of the established GMPLS UNI tunnel is displayed.
A GMPLS UNI tunnel is disabled.
The configuration is committed.