Verifying the GRE Tunnel Configuration

After a GRE tunnel is set up, you can view the running status and routing information about the tunnel interface.

Context

The GRE function has been configured.

Procedure

  • Run the display interface tunnel [ interface-number ] command to check tunnel interface information.
  • Run the display tunnel gre { backup | reassemble board } command to check binding information about the GRE service board or reassembling board.
  • Run the display ip routing-table command to check the IPv4 routing table.
  • Run the ping -a source-ip-address host command to check whether the two ends of the tunnel can successfully ping each other.
Parent Topic: Configuring a GRE Tunnel
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic