After configuring iFIT, verify the configuration.
Prerequisites
iFIT has been configured.
Procedure
- Run the display ifit command to check information about iFIT flows.
- Run the display ifit { source src-ip-address [ destination dest-ip-address ] | destination dest-ip-address } command to check information about an iFIT flow based on specified IPv4 addresses.
- Run the display ifit { source-ipv6 src-ipv6-address [ destination-ipv6 dest-ipv6-address ] | destination-ipv6 dest-ipv6-address } command to check iFIT flow information based on a specified IPv6 address.
- Run the display ifit static [ instance instance-name | flow-id flow-id ] command to check information about static iFIT flows.
- Run the display ifit dynamic [ flow-id flow-id ] command to check information about dynamic iFIT flows on the ingress.
- Run the display ifit dynamic-hop [ flow-id flow-id ] command to check information about dynamic iFIT flows on the transit node and egress.
- Run the display ifit { peer-ip peer-ip-address | peer-locator locator-ipv6-prefix } command to check iFIT flow information based on the specified next hop of the target flow.