Verifying the Configuration

After the configurations are complete, check the status of the interface, statistics on the interface, and the control-flap operation.

Run the display interface [ interface-type interface-number ] command to check the status of the interface and statistics on the interface.
Run the display control-flap interface interface-type interface-number command to check the configuration and running status of the control-flap function on interfaces.
Run the display counters [ bit ] [ inbound | outbound ] [ interface interface-type [ interface-number ] ] [ slot slot-id ] command to check the interface traffic statistics.
Run the display counters [ bit ] rate [ inbound | outbound ] [ interface interface-type [ interface-number | slot slot-id ] | slot slot-id ] command to check the interface traffic rates.
Run the display port split or display port split slot command to check the splitting status of the interface.
Run the display interface neighbor [ interface-type interface-number | slot slot-id [ card card-number ] ] command to check information about the neighboring devices and interfaces of a physical interface on the device.