Verifying the Configuration

After the configuration is completed on the Global-VE interface, FlexE interface license, FlexE interface, loopback interface, and Null interface, check the configurations.

Prerequisites

The Global-VE interface, FlexE interface license, FlexE interface, loopback interface, and Null interface have been configured.

Procedure

Run the display interface global-ve [ ve-number ] command to check the status of the Global-VE interface.
Run the display license resource usage port-slicing { all | slot slot-id } [ active | deactive ] command to check authorization information about the port slicing license on boards.
Run the display interface loopback [ loopback-number ] command to check the status of the Loopback interface.
Run the display interface null [ 0 ] command to check the status of the Null interface.
Run the display flexe group information slot slot-id card card-id command to check information about groups, the physical interfaces in FlexE mode added to groups, and timeslot allocation in the groups on the FlexE subcard.