After you associate direct routes with a Virtual Router Redundancy Protocol (VRRP) group, you can view information about the VRRP group and information in the routing table of the previous-hop device on the network side.
Prerequisites
Direct routes have been associated with a VRRP group.
Procedure
- Run the display ip routing-table command on the backup device in the VRRP group to check the modified direct route costs in the IP routing table.
- Run the display ip routing-table ip-address command on the VRRP group's previous-hop device on the network side to check whether network-to-user traffic lows through the master device in the VRRP group.