(Optional) Setting the Aging Time for Neighbor Entries in the Stale State

Procedure

1. Run system-view

   The system view is displayed.

2. Run ipv6 nd stale-timeout seconds

   The aging time is set for the neighbor entries in the Stale state.

3. Run interface interface-type interface-number

   The interface view is displayed.

4. Run ipv6 enable

   The IPv6 function is enabled.

5. Run ipv6 nd stale-timeout seconds

   The aging time is set for neighbor entries in the Stale state on the interface.

6. Run commit

   The configuration is committed.