Configuring the IPv6 Address of the Inbound Interface for Forwarding Packets as the Source Address of an ICMPv6 Time Exceeded Message Forcibly

To easily observe the inbound interface of a device along the path, you can configure the IPv6 address of the inbound interface for forwarding packets as the source address of an ICMPv6 Time Exceeded message.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ipv6 icmp hop-limit-exceeded source-address ingress-interface

    The IPv6 address of the inbound interface for forwarding packets is forcibly configured as the source address of an ICMPv6 Time Exceeded message.

  3. Run commit

    The configuration is committed.

Parent Topic: IPv6 Basic Configuration
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >