Verifying the Configuration

After configuring IPv4 IS-IS MT to isolate multicast services from unicast services, check the IS-IS MT configurations.

IPv4 IS-IS MT has been configured to isolate multicast services from unicast services.

Run the display isis peer [ verbose ] [ process-id | vpn-instance vpn-instance-name ] command to check information about IS-IS neighbors.
Run the display isis route [ process-id | vpn-instance vpn-instance-name ] [ ipv4 ] [ topology topology-name ] [ verbose | [ level-1 | level-2 ] | ip-address [ mask | mask-length ] ] ^* command to check IS-IS routing information.
Run the display isis spf-tree [ systemid systemid ] [ [ level-1 | level-2 ] | topology topology-name ] ^* verbose [ process-id | vpn-instance vpn-instance-name ] command to check IS-IS SPT information.