(Optional) Enabling a Device to Encapsulate Only One Interface IP Address in IS-IS LSPs (IPv4)

To implement interworking between Huawei and non-Huawei devices, you need to enable the type-132 TLV in LSPs to carry the IP address of only one IS-IS interface on the Huawei device.

Context

By default, on Huawei devices, the type-132 TLV in LSPs carries the IP addresses of all IS-IS interfaces. However, on some non-Huawei devices, the type-132 TLV in LSPs carries the IP address of only one IS-IS interface. To implement interworking between Huawei devices and these non-Huawei devices, enable the type-132 TLV in LSPs to carry the IP address of only one IS-IS interface on the Huawei devices.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run isis [ process-id ]

    An IS-IS process is created, and its view is displayed.

  3. Run advertise one-interface-address

    The type-132 TLV in LSPs is enabled to carry the IP address of only one IS-IS interface.

  4. Run commit

    The configuration is committed.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >