Configuring Send-time of a Key-id

Context

The time modes for sending key IDs vary according to keychain configuration modes.

Procedure

Absolute Timing Mode
1. Run system-view
  The system view is entered.
2. Run keychain keychain-name mode absolute
  The keychain is created in absolute timing mode and keychain view is entered.
3. Run time mode { utc | lmt }
  The time mode for keychain is configured.
4. Run key-id key-id
  The key-id is created and key-id view is entered.
5. Run send-time start-time start-date { duration { duration-value | infinite } | { to end-time end-date } }
  The send-time for the key-id is configured.
6. Run commit
  The configurations are committed.
Daily Periodic Timing Mode
1. Run system-view
  The system view is entered.
2. Run keychain keychain-name mode periodic daily
  The keychain is created in daily periodic timing mode and keychain view is entered.
3. Run time mode { utc | lmt }
  The time mode for keychain is configured.
4. Run key-id key-id
  The key-id is created and key-id view is entered.
5. Run send-time daily start-time to end-time
  The send-time for the key-id is configured.
6. Run commit
  The configurations are committed.
Weekly Periodic Timing Mode
1. Run system-view
  The system view is entered.
2. Run keychain keychain-name mode periodic weekly
  The keychain is created in weekly periodic timing mode and keychain view is entered.
3. Run time mode { utc | lmt }
  The time mode for keychain is configured.
4. Run key-id key-id
  The key-id is created and key-id view is entered.
5. Run send-time day { start-day to end-day | start-day &<1-7> }
  The send-time for the key-id is configured.
6. Run commit
  The configurations are committed.
Monthly Periodic Timing Mode
1. Run system-view
  The system view is entered.
2. Run keychain keychain-name mode periodic monthly
  The keychain is created in monthly periodic timing mode and keychain view is entered.
3. Run time mode { utc | lmt }
  The time mode for keychain is configured.
4. Run key-id key-id
  The key-id is created and key-id view is entered.
5. Run send-time date { start-date to end-date | start-date &<1-31> }
  The send-time for the key-id is configured.
6. Run commit
  The configurations are committed.
Yearly Periodic Timing Mode
1. Run system-view
  The system view is entered.
2. Run keychain keychain-name mode periodic yearly
  The keychain is created in yearly periodic timing mode and keychain view is entered.
3. Run time mode { utc | lmt }
  The time mode for keychain is configured.
4. Run key-id key-id
  The key-id is created and key-id view is entered.
5. Run send-time month { start-month to end-month | start-month &<1-12> }
  The send-time for the key-id is configured.
  
  Send-time for a key-id is configured according to the timing mode defined for the keychain. Only one send key-id in a keychain can be active at a time. The send-time of different key-ids in a keychain must not overlap each other.
  
  To re-configure send-time, we need to undo the send-time that is currently configured.
6. Run commit
  The configurations are committed.