Configuring the maximum number of invalid Layer 2 multicast protocol packets allowed on a multicast device helps to locate and rectify faults.
If forwarding entries cannot be created on a multicast network, configure the maximum number of invalid Layer 2 multicast protocol packets allowed on a multicast device. Then, you can locate and rectify the fault based on statistics and detailed information about invalid Layer 2 multicast protocol packets.
The system view is displayed.
The maximum number of invalid Layer 2 multicast protocol packets allowed on a multicast device is specified.
The configuration is committed.
Run the display current-configuration | include l2-multicast invalid-packet command to check the maximum number of invalid Layer 2 multicast protocol packets allowed on a multicast device.
<HUAWEI> display current-configuration | include l2-multicast invalid-packet
l2-multicast invalid-packet igmp max-count 20
Run the display igmp-snooping invalid-packet { vlan [ vlan-id ] | vsi [ vsi-name ] } message-type { leave | query | report | hello } *command to check statistics about invalid Layer 2 multicast protocol packets stored on a multicast device.
Run the display igmp-snooping invalid-packet [ packet-number ] verbose command to check detailed information about invalid Layer 2 multicast protocol packets stored on a multicast device.