Globally Enabling MPLS and LDP on an Interface

Procedure

1. Run system-view

   The system view is displayed.

2. Run interface interface-type interface-number

   The view of the interface on which an LDP session is to be established is displayed.

3. Run mpls

   MPLS is enabled on an interface.

4. Run mpls ldp

   MPLS LDP is enabled on the interface.

   

   Disabling MPLS LDP from an interface leads to interruptions of all LDP sessions on the interface and deletions of all LSPs established over these LDP sessions.

5. Run commit

   The configuration is committed.