Verifying the Remote LDP Session Configuration

After configuring a remote MPLS LDP session, you can view information about the LDP protocol, LDP session status, LDP adjacencies, and remote peers of the LDP session.

Prerequisites

The remote MPLS LDP session has been established.

Procedure

Run the display mpls ldp [ all | verbose ] command to check LDP information.
Run one of the following commands to check the LDP session status:
- display mpls ldp session [ verbose | peer-id ]
- display mpls ldp session [ all ] [ verbose ]
Run the display mpls ldp adjacency [ interface interface-type interface-number | remote ] [ peer peer-id ] [ verbose ] command to check information about LDP adjacencies.
Run one of the following commands to check information about the peer of an LDP session:
- display mpls ldp peer [ verbose | peer-id ]
- display mpls ldp peer [ all ] [ verbose]
Run the display mpls ldp remote-peer [ remote-peer-name | peer-id peer-id ] command to check a remote peer of an LDP session.