After configuring LDP Auto FRR, you can view information about the LDP Auto FRR LSP.
Prerequisites
LDP Auto FRR has been configured.
Procedure
- Run the display mpls lsp command to check information about LSPs generated after LDP Auto FRR is enabled.
- Run the display mpls ldp event session-down verbose command to check LDP session down causes. The cause value IGP delete the RLFA IID indicates that an LDP session went down because the RLFA route was deleted.
- Run the display mpls ldp event adjacency-down verbose command to check adjacency down causes. The cause value IGP delete the RLFA IID indicates that the adjacency went down because the RLFA route was deleted.