After configuring an mLDP P2MP LSP, verify mLDP P2MP LSP
information on each node along the LSP and mLDP P2MP LSP connectivity
on the root node (ingress).
Prerequisites
An mLDP P2MP LSP has been configured.
Procedure
- Run the ping multicast-lsp mldp p2mp root-ip root-ip-address { lsp-id lsp-id | opaque-value opaque-value } command to check mLDP P2MP LSP
connectivity on the root node.
- Run the display mpls mldp lsp p2mp [ root-ip root-ip-address { lsp-id lsp-id | opaque-value opaque-value } ] command
to check mLDP P2MP LSP information on a local node.
- Run the display
mpls multicast-lsp protocol mldp p2mp [ root-ip root-ip-address { lsp-id lsp-id | opaque-value opaque-value } ] [ lsr-role { bud | ingress | transit | egress } ] command to check mLDP P2MP LSP forwarding
information.