After configuring the static LSP, verify its information on a local node.
Prerequisites
The configurations of a static LSP are complete.
Procedure
- Run the display mpls static-lsp [ lsp-name ] [ { include | exclude } ip-address mask-length ] [ verbose ] command to check static LSP information on a local node.
- Run the display mpls lsp protocol static [ { include | exclude } destaddr masklen ] [ incoming-interface in-port-type in-port-num ] [ outgoing-interface out-port-type out-port-num ] [ in-label in-label-value ] [ out-label out-label-value ] [ nexthop nexthopaddr ] [ lsr-role{ ingress | transit | egress } ] [ verbose ] command to check information about static LSPs.