Enabling MPLS

After MPLS is enabled, related MPLS configurations can be performed.

Perform the following steps on each LSR in an MPLS domain:

Run system-view
The system view is displayed.
Run mpls lsr-id lsr-id
An LSR ID is set for a local node.
Run mpls
MPLS is enabled globally, and the MPLS view is displayed.
Run quit
Return to the system view.
Run interface interface-type interface-number
An interface is configured to forward MPLS packets.
Run mpls
MPLS is enabled on the interface.
Run commit
The configuration is committed.