After configuring LDP-IGP synchronization on an interface,
you can view the synchronization status of interfaces with LDP-IGP
synchronization enabled.
Prerequisites
LDP-IGP synchronization has been configured.
Procedure
- Run the display mpls ldp command to check the global
LDP configuration.
- Run the display isis [ process-id ] ldp-sync interface command to check synchronization
status of interfaces configured with LDP-IS-IS synchronization.
- Run the display ospf ldp-sync
interface { all | interface-type interface-number } command
to check synchronization status of interfaces configured with LDP-OSPF
synchronization.