(Optional) Setting the Value of the igp-sync-delay Timer

When an LDP session is reestablished on a faulty link, LDP starts the igp-sync-delay timer to wait for the establishment of an LSP. After the igp-sync-delay timer expires, LDP-IGP synchronization is complete.

Procedure

Perform the following steps:
1. Run system-view
  The system view is displayed.
2. Run mpls ldp
  The MPLS-LDP view is displayed.
3. Run igp-sync-delay timer value
  The igp-sync-delay timer value is set.
4. Run commit
  The configurations are committed.
Perform the following steps:
1. Run system-view
  The system view is displayed.
2. Run interface interface-type interface-number
  The interface view is displayed.
3. Run mpls ldp timer igp-sync-delay value
  The igp-sync-delay timer value is set.
4. Run commit
  The configurations are committed.