After configuring dynamic BFD for LDP LSP, you can view
BFD configurations and session information on the ingress and egress
of a specified LDP LSP.
Prerequisites
Dynamic BFD used to monitor LDP LSP has been configured.
Procedure
- Run the display mpls bfd session [ fec ip-address | nexthop ip-address | outgoing-interface interface-type interface-number | protocol { rsvp-te | ldp } ] [ verbose ] command to check BFD
session information.
- Run the display bfd session all verbose command on the ingress to check
BFD session information.
- Run the display bfd session passive-dynamic verbose command on the egress to check
BFD session information.