mLDP P2MP traffic statistics collection can be enabled on the ingress, transit nodes, and but nodes on mLDP P2MP LSPs.
To obtain mLDP P2MP LSP traffic statistics, configure mLDP P2MP traffic statistics collection.
Statistics only about forwarded traffic data on mLDP P2MP LSPs are collected. Therefore, statistics collection is configured only on the ingress, a transit node, or a bud node.
Before configuring mLDP P2MP traffic statistics collection, configure an mLDP P2MP tunnel.
The system view is displayed.
MPLS traffic statistics collection is enabled globally, and the traffic statistics view is displayed.
mLDP P2MP traffic statistics collection is enabled.
The configuration is committed.
After completing the configurations, you can run the following command to verify the configurations.
Run the display mpls mldp lsp p2mp traffic-statistics [ root-ip root-ip { lsp-id lsp-id | opaque-value opaque-value } | in-label in-label-value ] [ verbose ] command to check statistics about traffic forwarded on a specified mLDP P2MP LSP.
Before collecting statistics, run the reset mpls traffic-statistics mldp p2mp [ root-ip root-ip { lsp-id lsp-id | opaque-value opaque-value } | in-label in-label-value ] command to delete existing statistics.