Enabling the LLDP Alarm Function

Procedure

1. Run system-view

   The system view is displayed.

2. Run snmp-agent trap enable feature-name lldp [ trap-name lldpremtableschange ]

   The LLDP alarm function is enabled.

   After the LLDP alarm function is enabled for a device, the device sends alarms to the NMS when one of the following events occurs.

   • The LLDP 1.0.8802.1.1.2.0.0.1 lldpRemTablesChange alarm will be generated when the status information about an LLDP neighbor changes.

   The LLDP alarm function takes effect globally to control the capability to send LLDP alarms on all interfaces on a device.

   

   The network topology changes frequently when the networking is first formed. After the LLDP alarm function is enabled for a device, the device will frequently send alarms to the NMS. This increases the load on the system and wastes resources. It is recommended that you disable the LLDP alarm function when the networking is first formed.

3. Run commit

   The configuration is committed.