Verifying the Configuration of Parameters for Dynamic MAC Address Entries

After parameters for dynamic MAC address entries are configured, you can check detailed information about the aging time and the MAC address learning limit rule.

Prerequisites

Parameters for dynamic MAC address entries have been configured.

Procedure

Run the display mac-address aging-time command to check the aging time of dynamic MAC address entries.

After a MAC address learning limit rule is configured, check the configuration as follows.

Type of a MAC Address Learning Limit Rule	Command for Checking the Rule
MAC address learning limit rule on an interface	Checking the configuration by specifying a rule name Run the display mac-limit rule-name [ rule-name ] command to check the global MAC address learning limit rule. Checking the configuration without specifying a rule name Run the display mac-limit [ interface-type interface-number ] [ vlan vlan-id ] command to check the MAC address learning limit rule.
MAC address learning limit rule for a VLAN	Run the display mac-limit [ interface-type interface-number ] [ vlan vlan-id ] command to check the MAC address learning limit rule.
MAC address learning limit rule on a specified interface in a specified VLAN	Run the display mac-limit rule-name [ rule-name ] command to check the global MAC address learning limit rule.