Verifying the MPAC Configuration

After configuring the Management Plane Access Control (MPAC) policy, check the configurations.

An MPAC policy has been configured.

Run the display service-security policy { ipv4 | ipv6 } [ security-policy-name [ slot slot-id ] ] command to check information about all MPAC policies.
Run the display service-security binding { ipv4 | ipv6 } [ interface interface-type interface-number [ slot slot-id ] ] command to check information about MPAC policies on interfaces.
Run the display service-security statistics { ipv4 | ipv6 } [ security-policy-name ] command to check statistics about all matched MPAC rules.