After configuring route reflection to optimize the VPN
backbone layer, check BGP VPNv4 peer information and VPNv4 routing
information on the RR or its client PEs.
Prerequisites
Route reflection has been configured.
Procedure
- Run the display bgp vpnv4 all peer [
[ ipv4-address ] verbose ] command on the RR or a client PE to check information about BGP
VPNv4 peers.
- Run the display bgp vpnv4 all routing-table peer peer-ipv4-address { advertised-routes | received-routes } [ statistics ] command on the RR or
client PE to view information about the routes received from the peer
or the routes advertised to the peer.