Route reflection on an ASBR is used to reflect the VPNv4 routes advertised by the PE in the same AS to other PEs. As a result, PEs do not need to set up BGP peer relationships, which simplifies configurations.
The system view is displayed.
The BGP view is displayed.
The BGP-VPNv4 address family view is displayed.
The ASBR is configured as an RR, and the PE is configured as a client. If you need to configure multiple PEs as clients, repeatedly run this command.
Route reflection between clients through the RR is disabled. You need to run this command if the clients are fully connected.
The function to filter VPNv4 routes based on VPN targets is disabled.
A reflection policy is configured for the RR.
The configuration is committed.