Configuring MP-IBGP Between ASBRs in the Same AS

After the MP-IBGP peer relationship is established between the ASBRs in the same AS, ASBRs can exchange VPNv4 routes.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run bgp as-number

    The BGP view is displayed.

  3. Run peer peer-address as-number as-number

    The IBGP peer relationship is set up between the ASBRs in the same AS.

  4. Run peer peer-address connect-interface loopback interface-number

    The loopback interface is specified as the outbound interface of the BGP session.

  5. Run ipv4-family vpnv4 [ unicast ]

    The BGP-VPNv4 address family view is displayed.

  6. Run peer peer-address enable

    The function to exchange VPNv4 routes between the ASBRs in the same AS is enabled.

  7. Run commit

    The configuration is committed.

Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >