After configuring inter-AS VPN OptionC (solution 2), check information about all BGP peer relationships, VPNv4 routes on PEs, and labels of IPv4 routes on ASBRs.
Prerequisites
Inter-AS VPN Option C (solution 2) has been configured.
Procedure
- Run the display bgp vpnv4 all peer command to check information about the specified VPNv4 peer on a PE.
- Run the display bgp vpnv4 all routing-table command to check information about the VPN-IPv4 routing table on a PE.
- Run the display bgp routing-table label command to check information about the labels of the IPv4 routes on an ASBR.
- Run the display ip routing-table vpn-instance vpn-instance-name command to check information about the VPN routing table on a PE.
- Run the display mpls route-state [ vpn-instance vpn-instance-name ] [ { exclude | include } { idle | ready | settingup } * | destination-address mask-length ] [ verbose ] command to check the matching relationship between routes and the LSP on an ASBR.
- Run the display ip routing-table command to check information about the routing table on an ASBR.
- Run the display mpls lsp [ vpn-instance vpn-instance-name ] [ protocol ldp ] [ { exclude | include } ip-address mask-length ] [ outgoing-interface interface-type interface-number ] [ in-label in-label-value ] [ out-label out-label-value ] [ lsr-role { egress | ingress | transit } ] [ verbose ] command to check whether an LDP LSP is established on an ASBR.