Applying a Tunnel Policy to a VPN

This section describes how to apply a tunnel policy to a VPN to change the tunnel used to carry VPN services or the sequence in which tunnels are selected for VPN services.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run ip vpn-instance vpn-instance-name

    The VPN instance view is displayed.

  3. Run ipv4-family

    The VPN instance IPv4 address family view is displayed.

  4. Run tnl-policy policy-name

    A tunnel policy is applied to the VPN instance IPv4 address family.

  5. Run commit

    The configuration is committed.

Parent Topic: Configuring a Tunnel Policy for the Backbone Network of a BGP/MPLS IP VPN
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >