Configuring the Level 1 Carrier CE to Access the Level 1 Carrier PE (Using the BGP Labeled Route Solution)

When the Level 1 carrier and Level 2 carrier are in different ASs, the Level 1 carrier takes the Level 2 carrier as its VPN user.

Procedure

Create a VPN instance on the Level 1 carrier PE.
1. Run system-view
  The system view is displayed.
2. Run ip vpn-instance vpn-instance-name
  A VPN instance is created, and the VPN instance view is displayed.
3. Run ipv4-family
  The VPN instance IPv4 address family is enabled, and the view of this address family is displayed.
4. Run route-distinguisher route-distinguisher
  An RD is set for the VPN instance IPv4 address family.
5. Run apply-label per-route
  The label distribution mode is set to per-route per-label.
6. Run vpn-target vpn-target &<1-8> [ both | export-extcommunity | import-extcommunity ]
  A VPN target is configured for the VPN instance IPv4 address family.
7. Run quit
  Return to the system view.
8. Run interface interface-type interface-number
  The view of the interface connected to the Level 1 carrier CE is displayed.
9. Run ip binding vpn-instance vpn-instance-name
  The interface is associated with the VPN instance.
10. Run ip address ip-address { mask | mask-length }
  The IP address is configured for the interface.
11. Run mpls
  MPLS is enabled on the interface.
12. Run commit
  The configuration is committed.
Configure labeled BGP on a Level 1 carrier PE.
1. Run system-view
  The system view is displayed.
2. Run route-policy route-policy-name permit node seq-number
  A route-policy is created for the Level 1 carrier CE.
3. Run apply mpls-label
  An action of allocating MPLS labels to the selected IPv4 routes is configured in the route-policy.
4. Run quit
  Return to the system view.
5. Run bgp as-number1
  The BGP view is displayed.
6. Run ipv4-family vpn-instance vpn-instance-name
  The BGP-VPN instance IPv4 address family view is displayed.
7. Run peer ipv4-address as-number as-number2
  The Level 1 carrier CE is configured as an EBGP peer of the Level 1 carrier PE.
8. Run peer ipv4-address label-route-capability
  The capability of exchanging labeled IPv4 routes is enabled.
9. Run peer ipv4-address route-policy route-policy-name export
  Labels are assigned to the routes advertised to the Level 1 carrier CE.
10. Run commit
  The configuration is committed.
Configure labeled BGP on the Level 1 carrier CE between it and the Level 1 carrier PE.
1. Run system-view
  The system view is displayed.
2. Run interface interface-type interface-number
  The view of the interface connected to the Level 1 carrier PE is displayed.
3. Run ip address ip-address { mask | mask-length }
  The IP address is configured for the interface.
4. Run mpls
  MPLS is enabled on the interface.
5. Run quit
  Return to the system view.
6. Run route-policy route-policy-name permit node seq-number
  A route-policy is created for the Level 1 carrier PE.
7. Run apply mpls-label
  An action of allocating MPLS labels to the selected IPv4 routes is configured in the route-policy.
8. Run quit
  Return to the system view.
9. Run bgp as-number
  The BGP view is displayed.
10. Run peer ipv4-address as-number as-number2
  The Level 1 carrier PE is configured as an EBGP peer of the Level 1 carrier CE.
11. Run peer ipv4-address label-route-capability
  The capability of exchanging labeled IPv4 routes is enabled.
12. Run peer ipv4-address route-policy route-policy-name export
  Labels are assigned to the routes advertised to the Level 1 carrier PE.
13. Run commit
  The configuration is committed.
Configure labeled BGP on the Level 1 carrier CE between it and the Level 2 carrier PE.
1. Run system-view
  The system view is displayed.
2. Run route-policy route-policy-name permit node seq-number
  A route-policy is created for the Level 2 carrier PE.
3. Run if-match mpls-label
  Packets are matched against labeled IPv4 routes.
4. Run apply mpls-label
  An action of allocating MPLS labels to the selected IPv4 routes is configured in the route-policy.
5. Run quit
  Return to the system view.
6. Run bgp as-number
  The BGP view is displayed.
7. Run peer ipv4-address as-number as-number
  The Level 2 carrier PE is configured as an IBGP peer of the Level 1 carrier CE.
8. Run peer ipv4-address connect-interface loopback interface-number
  The interface for setting up a TCP connection is specified.
9. Run peer ipv4-address label-route-capability
  The capability of exchanging labeled IPv4 routes is enabled.
10. Run peer ipv4-address route-policy route-policy-name export
  Labels are allocated to the labeled IPv4 routes to be advertised to the Level 2 carrier PE.
11. Run import-route protocol process-id
  The internal routes of the Level 2 carrier network are imported.
12. Run commit
  The configuration is committed.
Configure labeled BGP on a Level 2 carrier PE.
1. Run system-view
  The system view is displayed.
2. Run bgp as-number
  The BGP view is displayed.
3. Run peer ipv4-address as-number as-number
  The Level 1 carrier CE is configured as an IBGP peer of the Level 2 carrier PE.
4. Run peer ipv4-address connect-interface loopback interface-number
  The interface for setting up a TCP connection is specified.
5. Run peer ipv4-address label-route-capability
  The capability of exchanging labeled IPv4 routes is enabled.
6. Run commit
  The configuration is committed.