Configuring MP-IBGP Between a PE and an ASBR in the Same AS

Procedure

1. Run system-view

   The system view is displayed.

2. Run bgp as-number

   The BGP view is displayed.

3. Run peer ipv4-address as-number as-number

   The IBGP peer relationship is set up between the PE and ASBR in the same AS.

4. Run peer ipv4-address connect-interface loopback interface-number

   The loopback interface is specified as the outbound interface of the BGP session.

5. Run ipv6-family vpnv6 [ unicast ]

   The BGP-VPN IPv6 address family view is displayed.

6. Run peer ipv4-address enable

   The capability of VPNv6 route exchange between the PE and ASBR is enabled.

7. Run commit

   The configuration is committed.