After configuring inter-AS IPv6 VPN OptionC (solution 2),
check information about all BGP peer relationships, VPNv6 routes and
IPv6 VPN routes on PEs, labels of IPv4 routes on ASBRs, and information
about LDP LSP on ASBRs.
Prerequisites
Inter-AS IPv6 VPN Option C (solution 2) has been configured.
Procedure
- Run the display bgp vpnv6 all peer command
to check information about the specified VPNv6 peer on a PE.
- Run the display bgp vpnv6 all routing-table command to check information about the VPNv6 routing table on a
PE.
- Run the display bgp routing-table
label command to check information about the labels
of the IPv4 routes on an ASBR.
- Run the display
ip routing-table vpn-instance vpn-instance-name command to check information about the IPv6 VPN routing table on
a PE.
- Run the display mpls route-state [ vpn-instance vpn-instance-name ] [ { exclude | include } { idle | ready | settingup } * | destination-address mask-length ] [ verbose ] command to check the matching relationship between routes and
the LSP on an ASBR.
- Run the display mpls lsp [ vpn-instance vpn-instance-name ] [ protocol ldp ] [ { exclude | include } ip-address mask-length ] [ outgoing-interface interface-type interface-number ] [ in-label in-label-value ] [ out-label out-label-value ] [ lsr-role { egress | ingress | transit } ] [ verbose ] command to check whether
an LDP LSP is established on an ASBR.