Verifying the Configuration of Optimizing MPLS

After you adjust MPLS parameters, verify MPLS-enabled interface information.

Prerequisites

MPLS parameters have been adjusted.

Procedure

  1. Run the display mpls rsvp-te interface [ interface-type interface-number ] command to check MPLS TE-enabled interface information, including the interface MTU.
  2. Run the display mpls ldp interface [ interface-type interface-number | verbose ] command to check MPLS LDP-enabled interface information, including the interface MTU.
  3. Run the display mpls interface [ interface-type interface-number ] [ verbose ] command to check MPLS-enabled interface information.
Parent Topic: Optimizing MPLS
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic