Verifying the Configuration of MPLS OAM for a Static Bidirectional Co-routed LSP

After configuring MPLS OAM for a static bidirectional co-routed LSP, verify the configurations.

Prerequisites

MPLS OAM has been configured for a static bidirectional co-routed LSP.

Procedure

Run the display mpls oam bidirectional-tunnel all command to check information about all static bidirectional co-routed LSPs.

Parent Topic: Configuring MPLS OAM for a Static Bidirectional Co-routed LSP

Copyright © Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd.

< Previous topic