After adjusting PIM neighbor parameters, Designated router (DR) parameters, forwarding parameters, or Assert parameters, verify information about PIM interfaces, PIM neighbors, PIM routing tables, and statistics about PIM control messages.
Prerequisites
PIM neighbor parameters, DR parameters, forwarding parameters, or Assert parameters have been adjusted.
Procedure
- Run the display pim [ vpn-instance vpn-instance-name | all-instance ] interface [ interface-type interface-number | up | down ] [ verbose ] command to check information about PIM interfaces.
- Run the display pim [ vpn-instance vpn-instance-name | all-instance ] neighbor [ interface interface-type interface-number | neighbor-address | verbose ] * command to check information about PIM neighbors.
- Run the display pim [ vpn-instance vpn-instance-name | all-instance ] routing-table [ group-address [ mask { group-mask-length | group-mask } ] | source-address [ mask { source-mask-length | source-mask } ] | outgoing-interface include { interface-type interface-number | register | none } | fsm ] command to check information about the PIM routing table.
- Run the display pim [ vpn-instance vpn-instance-name | all-instance ] control-message counters [ interface interface-type interface-number | message-type { assert | hello | join-prune | bsr } ] * or display pim [ vpn-instance vpn-instance-name | all-instance ] control-message counters message-type { crp | probe | register | register-stop } command to check statistics about PIM control messages.