After configuring IPv6 PIM-SM, verify information about BootStrap routers (BSRs), Rendezvous Points (RPs), PIM interfaces, PIM neighbors, and PIM routing tables.
Prerequisites
IPv6 PIM-SM has been configured.
Procedure
- Run the display pim ipv6 bsr-info command to check BSR information in an IPv6 PIM-SM domain.
- Run the display pim ipv6 interface [ interface-type interface-number ] [ verbose ] command to check information about IPv6 PIM interfaces.
- Run the display pim ipv6 neighbor [ ipv6-link-local-address | interface interface-type interface-number | verbose ] * command to check information about IPv6 PIM neighbors.
- Run the display pim ipv6 routing-table [ ipv6-source-address [ mask mask-length ] | ipv6-group-address [ mask mask-length ] | incoming-interface { interface-type interface-number | register } | outgoing-interface { include | exclude | match } { interface-type interface-number | register | none } | mode { sm | ssm } | flags flag-value | fsm ] * [ outgoing-interface-number [ number ] ] command to check information about IPv6 PIM routing tables.
- Run the display pim ipv6 rp-info [ ipv6-group-address ] command to check RP information in an IPv6 PIM-SM domain.