After configuring IPv6 Protocol Independent Multicast-Source-Specific Multicast (PIM-SSM), verify PIM interfaces, PIM neighbors, and PIM routing tables by using related commands.
Prerequisites
The IPv6 PIM-SSM configurations are complete.
Procedure
- Run the display pim ipv6 interface [ interface-type interface-number ] [ verbose ] command to check IPv6 PIM interfaces.
- Run the display pim ipv6 neighbor [ ipv6-link-local-address | interface interface-type interface-number | verbose ] * command to check IPv6 PIM neighbors.
- Run the display pim ipv6 routing-table [ ipv6-source-address [ mask mask-length ] | ipv6-group-address [ mask mask-length ] | incoming-interface { interface-type interface-number | register } | outgoing-interface { include | exclude | match } { interface-type interface-number | register | none } | mode { sm | ssm } | flags flag-value | fsm ] * [ outgoing-interface-number [ number ] ] command to check the IPv6 PIM routing table of a device.