Deleting IGMP Group Information
If IGMP group information is unnecessary, delete it in the user view.
Context
The reset igmp group command deletes information about the IGMP groups that an interface dynamically joins, which may cause receivers to fail to receive multicast data. Exercise caution when running this command.
Procedure
- To delete information about the IGMP groups that an interface dynamically joins, run the following commands in the user view.
reset igmp [ vpn-instance vpn-instance-name | all-instance ] group { all | interface interface-type interface-number { all | group-address [ mask { group-mask | group-mask-length } ] [ source-address [ mask { source-mask | source-mask-length } ] ] } }
reset igmp [ vpn-instance vpn-instance-name | all-instance ] group ssm-mapping { all | interface interface-type interface-number { all | group-address [ mask { group-mask | group-mask-length } ] } }
- To delete information about the IGMP groups that an interface statically joins, run the undo igmp static-group { all | group-address [ inc-step-mask { group-mask | group-mask-length } number group-number ] [ source source-address ] } command in the interface view.