Enabling MLD

To enable an interface to process user MLD join requests, enable MLD on the interface.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number

    The interface view is displayed.

  3. Run mld enable

    MLD is enabled.

    MLD parameters that are configured on an interface before MLD is enabled on this interface take effect only after the mld enable command is run on the interface.

  4. Run commit

    The configuration is committed.

Parent Topic: Configuring Basic MLD Functions
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic Next topic >